Grasscity - Dab Rig Sale - 50% Discount

Need some assistance with a chillum

Discussion in 'DIY and Homemade' started by nose, Feb 16, 2013.

  1. Hiya fellers, I'm looking for a fairly easy way to make a bamboo chillum without anything special like designs, just simple
     
  2. Main thing your gonna have to worry about is it pulling through too quickly. I'd say just take the bamboo your gonna use and drill a pretty thick hole about 6/8ths of the way down the middle and then drill a hole maybe 1/4inch thick at MOST through the other end till it meets the middle of the first hole. Then just hollow out the smaller hole on the outside until it will pack enough for you and you should be good. And try to char the inside a little bit before you smoke out of it.

    Only reason I wrote this is because im assuming your underage and cant buy pipes. But if you are somehow 18 or over you should seriously find your local smoke shop and buy a little 5 or 10 dollar glass bowl. Trust me it'll be worth it.
     

Share This Page