I never have made a legit bong, and I heard home made ones can screw you up. What's the best way to make a homemade GOOD QUALITY one? Here's some materials I have: Milk Bottles(gallon bottles) 2 Liter Soda Bottles Gatorade Bottles Pill bottles Hot glue + Hot glue gun Lighter Bic Pens Drill Bit pieces Tin Foil Metal + Wire Trumpet mouth piece (serves as short stem and bowl) Any thoughts of what to do with that to make a good ass ice bong?
You definitely have more than you need in that list, you're set. All I would say is maybe find a cool antique glass bottle or alcohol bottle or something rather than plastic 2 liters or Gatorade. I've seen a Gatorade homemade and it looks pretty slobby. But that's just me as I'm into aesthetic appeal. Anyway, good luck. Stoked to see the outcome. Edit: The trumpet mouth piece is a sick idea. Definitely go with a nicer bottle to make this thing a piece of art.
Glass bit, and a coke bottle. Or a $5-$10 vase. Trumpet as downstem/bowl, and make sure that you drill the hole the exact size, therefore you can pull the stem to clear it. If not, you'll have to drill a shotgun hole or a choke hole.
then you can make a bubbler with a pill bottle and the bic pen. empty the bic pen so you have the tube and this metal end you write with hot this metal end and put it upside down so its airtight cut the tube in 2 equal parts One will be the mouthpiece and the other will be the bowl and downstem
use gatorade or powerade bottles cuz there thicker. what you can do if you have to is cut a pen sized hole in each cap in the same spot, put a pen casing through it and then hot glue them together. then if you want to get fancy you can add a perc with a pill bottle or some straws. but, if you want you could just leave it at that. then cut the bottom of one of the bottles. take a 3rd bottle thats the same size and cut evenly anywhere the diameter is the same as the diameter or the bottle you cut the bottom off of. then hot glue those together so its like a bottle with two mouthpieces. and for the base of the bong you could add a stem or keep it simple and just put a carb on. then connect the base bottle to the two mouthed bottle by screwing them into the hot clued caps with a pen throught them. that mightve been confusing but i love mine. perced with and ice catcher and ashcather. if you want just ask for more info
Just got some gatorade. Gonna have some with dinner then use 2 bottles to make a ice bong, with an ice cathcer. Have hot glue to make it air tight, and will use a ligher to weaken the plastic and push the trumpet piece in.
my favorite homemade smokeing device is a gravity out of one of those huge water jugs and cut off the bottom and put it in a sink or water and make a massive grav
Plastic Sobe Bottle Sharpie Mini-Mag light Large pill bottle Duct Tape Hot Wand The plastic sobe bottle is the vase because its so thick, burn a hole in it for the hollowed out sharpie as the stem Burn a hole in the pill bottles side for the hollowed out sharpie as a stem Burn a hole in the pill bottles cap for the hollowed out mini maglight for the bowlpeice/slider Slam in the sharpie into the vase, put the pill bottle onto the sharpie, put the maglight thru the cap Burn a carb hole or take off the cap for the pill bottle when you want to clear it as if it were a slider Flashlight tip where the bulb would be makes a good bowl, needs a filter though. Coil a paperclip or burn the furr off a coilded pipe cleaner to make it easier. You now have a bong with an ashcatcher. I'll post pics once I find my cam.
