[ame=http://vimeo.com/19740213]Homemade Bong on Vimeo[/ame] Diffusion is good, its pretty smooth actually. The splash guard did an amazing job 0 drops of water on my lips. Total height is 10" perfect to sit in mini fridge for wake and bakes! It does have a bit of drag for the very initial chug though. Like a second in the drag would be significantly reduced. Might fix... but prolly not cos I got lazy... Slightly wobbly. Prolly need a shorter carbon filter... Almost burnt my brows... Height was fine with just the slide. But since its acrylic I want to keep it clean for a longer time If the old lady at the craft store knew what her discount boxes are going to become I wonder what her reaction would be. I might try to take photo a bit later, can't find my sd card.
its just different size acrylic cubes you can find in craft stores like micheals i found a tiny one that is about 1"x2"x3/4" to make the diffuser.
haha yeah if I can get more tools I actually have some rather weird idea for diffusions I can attempt with it xD Though I really wanted a small water pipe so I can take smaller hits easily so had to keep it simple this time
thanks! its made of a small acrylic box, I just get the holes punched on it, cut a bigger hole on the side. Cut same size holes on the 2 outer casing boxes and align the 3 holes. Glue them together. The rest of it is just make hole and stick a tube or slide in The holes are cut with heated metal (yeaaah plastic fumes... I had good ventilation at least) so it looks quite shitty on close up, need to acquire a drill before I try another. Would be so much faster too.
so I got the chance to take a couple hits from this thing and I must say it's a winner. Smooth hits that feel like a 12gauge hitting your chest. Great homemade dinger!
HOLY SHIT That is amazing. I'd pay $60+ for a similar model. Whats your brand name? Are you on artfire or etsy? I must have. http://www.change.org/petitions/bring-glass-back-to-etsy-2#?opt_new=t Sign this please =]
Dude my best idea was on a bong i made with an ashcatcher and a main chamber. Above the main chamber smoke when up a tube that went like 4" up into a chamber above the main chamber. I had a fitting that went over the tube and at the bottom of the fitting I drilled small holes. Fill that chamber with water just above the holes when the bong was tiltled and it was the last diffusion that always made each hit super smooth. Smoke had to go up the tube, then back down the fitting and out the holes in the water. Because there were so many holes in it and because of how I modified the fitting, there was zero added drag and zero splash in the face.
