Since I'm new here, I thought I'd post up my custom 2-hitter. They say that smoking leads to carpentry, but since I'm not a woodsmith, this is the best I can do. I made both of these using coax wire connector parts. Here's my travel pipe. I took a RF 90 degree adapter, and drilled it out. I also drilled out the inside of several F-81 barrel connectors. The mouth piece is a RG59 compression fitting. All I have to do is remove the terminator to blaze. When I'm headed somewhere, I'll take a couple of these with me. I made a larger one also using a drilled out RF 90 degree adapter, quick connector, F-81 barrel and a female-to-female adapter. The mouth piece on this one is also a compression fittinig, with the coax end ripped off. I like this one better, as it's less harsh and I don't feel like I'm going to singe my eyebrows off. The quick connect holds just a little bit more volume than the barrel. Total cost: $0.00
Yeah it's ghetto...but it's pretty effective. I have a nice glass pipe with a carb that I mostly use at home now. I consider the little one disposable in case I run into any problems. Thanks...plastic blech
