Home Made Gravity Bong

I Just got given these Instructions for a home made gravity bong is it right.


Step-by-Step Guide to Making a Gravity Bong
Materials Needed:

• Faucet with a mesh screen
• Socket (size that fits snugly in a plastic bottle)
• Tape
• Plastic bottle (1 to 2 liters)
• Bucket
• Tin foil (optional)
• Real bong bowl piece (optional)

Instructions:

1. Prepare the Mesh Screen:
   
   • Locate the mesh screen in your faucet. It is usually found in the nozzle.
   • Carefully remove the mesh screen from the faucet.
   • Clean the mesh screen thoroughly to ensure it is free of debris.
2. Create the Bowl Piece with a Socket:
   
   • Take the socket and wrap tape around it until it fits snugly into the mouth of a plastic bottle.
   • Insert the cleaned mesh screen into the socket to create a bowl piece.
3. Prepare the Plastic Bottle:
   
   • Take a 1-liter to 2-liter plastic bottle.
   • Cut the bottom off the bottle using a sharp knife or scissors.
4. Assemble the Gravity Bong:
   
   • Fill a bucket with water.
   • Submerge the bottle in the water, keeping the mouth of the bottle above the water surface.
   • Place the socket with the mesh screen (bowl piece) into the mouth of the bottle.
5. Alternative Bowl Piece with Tin Foil:
   
   • If you don't have a mesh screen, you can use tin foil to create a bowl piece.
   • Form a small bowl shape with the tin foil.
   • Poke several small holes in the bottom of the tin foil bowl to allow airflow.
   • Place the tin foil bowl into the socket.
6. Using a Real Bong Bowl Piece:
   
   • If you have a real bong bowl piece, you can use that as an alternative.
   • Simply insert the bong bowl piece into the mouth of the bottle, similar to the socket method.

Using the Gravity Bong:

1. Fill the Bowl:
   
   • Place your desired substance into the bowl piece (mesh screen, tin foil, or bong bowl piece).
2. Light and Lift:
   
   • Light the substance in the bowl while slowly lifting the bottle out of the water.
   • As you lift the bottle, it will fill with smoke.
3. Inhale:
   
   • Once the bottle is almost out of the water and filled with smoke, remove the bowl piece.
   • Place your mouth over the bottle opening and slowly push the bottle back into the water, forcing the smoke into your lungs.

 

Never Mind it did not work my bud fell into the water and I got pissed.

 

No but i might try again tomorrow with new bud.

 

I bought a bong its just I like to make my own stuff makes me feel like ive achieved something.