recently I discovered ramune a japanese soda with a marble as a cap. after i found out how to get the marble out(a 7/8" drill bit) idecided to make it a bong.the bong wasn't working out to well(not so airtight) so i thought i'd make another one but a regular pipe. supplies: 1 wide-mouth glass bottle Bottle(any will do i just like the ramune bottle shape.) 1 5/16" glass drill bit 1 4 mm socket some superglue some ganj How to: !.take the bottle and drill the hole through it where you please. (this may take some time depending on the glass thickness. it took me two hours.obv use a drill).And don't make a full hole just enough to fit the socket without it going into the bottle 2.put some super glue on the smaller end of the 4 mm socket and put it in ur hole and hold it until glue hardens. 3.when using it use the wide mout bottle to make an air pull by putting your lip in2 the bottle finished piece
