so, im lookin into building my own multi chamber bong out of acrylic and some flexable tubing... i wanna make something similar to this.... but im a little worries that any certian bonding glues might be toxic when used with weed.... are there some that would be safe for me to use, or what would be the best method of bonding the acrylic tubes to the acrylic plates??
its not pictured, cuz the people i got the pic from just make acrylic stuff.... but the downstem goes on that extra gasket on top of the lower of the 2 vertical chambers.
that middle tube is pretty pointless if it doesn't have a down stem too... wat if you cauked the outside of the seal?
it only needs one downstem, it goes in the top of the lower one, then feeds into the top of the second chamber via the red tube, but then mine would go from the bottom of the second chamber into the bottom of the 3rd that is slanted, the one you hit from. i mainly wanna do a multi chamber one cuz ive got a little group of friends that come over weekly, and i think this looks really cool, and by milking all the chambers it will make a good hit for like 2-3 ppl... the sealant on the outside of the tube sounds pretty good.... i might try that.
